Items	Unit	HDT200
Screw Diamter	mm	Φ45	Φ50	Φ55
Screw L/D Ratio	L/D	23.4	21	19.1
Injection Pressure	Mpa	227	184	152
Theoretical Shot Volume	cm3	349	431	522
Theoretical Shot Weight	g	317.5	392	475
Mould Orientaing Ring/Roggle Spherical Surface	mm	Φ125/SR10
Nozzle Stroke	mm	350
Screw Speed	r.p.m	0-180
Claming Force	KN	2000
Space Between Tie Bars	mm	480*460
Mould Plate Stroke (max)	mm	450
Max/Min Mould Thickness	mm	500/200
Ejector Force	KN	45
Stroke	mm	140
No. of Ejctor Pins	pc	5
Motor Power	KW	18.5
Heating Power	KW	13
Limited Pressure of Oil Pump	Mpa	16
Hydraulic Tank Capacity	L	390
Machine Weight	T	6.5
Machine Size	m	5.2*1.5*2.1

We mainly produce two series machines. There are  HDT series and HDF series.

(1), The HDT machines ' clamping force are from 80 tons to 2200 tons and the shot weight are from 80g to 20000g. These machines have strong locking force and a very good injection precise also a stable performance etc.

(2), The HDF machines are high-speed injection molding machine.

The machine's cycle time is very short (2.6 seconds-3.6 seconds) with a high injection pressure (to be possible to reach 240MPA) and a high-speed injection (to be possible to reach 600MM/S), it can be used to produce the thin-wall products, especially the thin-wall snack boxes and containers (with the wall thickness of 0.4mm)

If your are interested in our machine,please feel free to contact me.

best regards