Items	Unit	HDT120
Screw Diamter	mm	Φ36	Φ40	Φ45
Screw L/D Ratio	L/D	23.8	21.5	19.1
Injection Pressure	Mpa	220	180	142
Theoretical Shot Volume	cm3	193	238	302
Theoretical Shot Weight	g	175	215	270
Mould Orientaing Ring/Roggle Spherical Surface	mm	Φ125/SR10
Nozzle Stroke	mm	300
Screw Speed	r.p.m	0-170
Claming Force	KN	1200
Space Between Tie Bars	mm	400*380
Mould Plate Stroke (max)	mm	360
Max/Min Mould Thickness	mm	400/120
Ejector Force	KN	35
Stroke	mm	110
No. of Ejctor Pins	pc	5
Motor Power	KW	11
Heating Power	KW	6.5
Limited Pressure of Oil Pump	Mpa	16
Hydraulic Tank Capacity	L	200
Machine Weight	T	3.8
Machine Size	m	4.4*1.32*1.8

We mainly produce two series machines. There are  HDT series and HDF series.

(1), The HDT machines ' clamping force are from 80 tons to 2200 tons and the shot weight are from 80g to 20000g. These machines have strong locking force and a very good injection precise also a stable performance etc.

(2), The HDF machines are high-speed injection molding machine.

The machine's cycle time is very short (2.6 seconds-3.6 seconds) with a high injection pressure (to be possible to reach 240MPA) and a high-speed injection (to be possible to reach 600MM/S), it can be used to produce the thin-wall products, especially the thin-wall snack boxes and containers (with the wall thickness of 0.4mm)

If your are interested in our machine,please feel free to contact me.

best regards