Items	Unit	HDT80
Screw Diamter	mm	Φ34	Φ36	Φ40
Screw L/D Ratio	L/D	22	20.8	18.7
Injection Pressure	Mpa	205	183	148.5
Theoretical Shot Volume	cm3	145	162	200
Theoretical Shot Weight	g	131	147	182
Mould Orientaing Ring/Roggle Spherical Surface	mm	Φ125/SR10
Nozzle Stroke	mm	300
Screw Speed	r.p.m	0-190
Claming Force	KN	800
Space Between Tie Bars	mm	330*320
Mould Plate Stroke (max)	mm	310
Max/Min Mould Thickness	mm	330/100
Ejector Force	KN	35
Stroke	mm	100
No. of Ejctor Pins	pc	5
Motor Power	KW	7.5
Heating Power	KW	5.88
Limited Pressure of Oil Pump	Mpa	16
Hydraulic Tank Capacity	L	180
Machine Weight	T	3
Machine Size	m	3.8*1.2*1.7

We mainly produce two series machines. There are  HDT series and HDF series.

(1), The HDT machines ' clamping force are from 80 tons to 2200 tons and the shot weight are from 80g to 20000g. These machines have strong locking force and a very good injection precise also a stable performance etc.

(2), The HDF machines are high-speed injection molding machine.

The machine's cycle time is very short (2.6 seconds-3.6 seconds) with a high injection pressure (to be possible to reach 240MPA) and a high-speed injection (to be possible to reach 600MM/S), it can be used to produce the thin-wall products, especially the thin-wall snack boxes and containers (with the wall thickness of 0.4mm)

If your are interested in our machine,please feel free to contact me.

best regards